ADME 2.12 RED STOP BAR CROSSING PROCEDURES

  • Home ADME ADME 2.12 RED STOP BAR CROSSIN....

ADME 2.12 RED STOP BAR CROSSING PROCEDURES

Guidelines for aerodrome planning without taxiways crossing runways shall be the future aim to eliminate one of the main contributors to runway incursion. In particular when existing aerodromes are expanded strict guidelines to avoid construction of critical areas should become applicable.

Environment protection procedures at aerodromes shall be reassessed, in order to consider the impact on runway operations and risk for runway incursion.

Wherever complex aerodrome layout, runway-crossing taxiways or known areas of danger (hot spots) exist adequate tools (e. g. SMR, A-SMGCS, stop bars, etc.) should be provided to increase controller, pilot and driver awareness.

IFATCA should support IFALPA policy and never instruct an aircraft to cross a red stop bar. The stop bar should be switched off rather than be crossed at red.


IFATCA Policy is:

Stop bars shall be switched on to indicate that all traffic shall stop. Stop bars shall be switched off to indicate that traffic may proceed, when so authorized by the aerodrome control tower.

Contingency procedures should be available for stop bar malfunction.

The ICAO provisions for stop bar related procedures should be made consistent and unambiguous in all relevant ICAO documents.

The stop bar HMI design, location, implementation and automation should prevent an unacceptable increase of workload, distraction and head down operations.

The operation of stop bars 24 hours a day is supported by IFATCA provided that the design and implementation of stop bars support operations at any traffic volumes.


See: WP 87 – Kaohsiung 2006, WP 88 – Dubrovnik 2009, Resolution BC1, BC2 – WP 82 – Punta Cana 2010

 

 

Last Update: August 9, 2022  

November 4, 2019   772   Jean-Francois Lepage    ADME    

Comments are closed.


  • Search Knowledgebase