Review of Part IV – Professional Policy of the TPM

Review of Part IV – Professional Policy of the TPM

DISCLAIMER The draft recommendations contained herein were preliminary drafts submitted for discussion purposes only and do not constitute final determinations. They have been subject to modification, substitution, or rejection and may not reflect the adopted positions of IFATCA. For the … Continued
Policy Review of Simultaneous ATC Training on Adjacent Positions

Policy Review of Simultaneous ATC Training on Adjacent Positions

DISCLAIMER The draft recommendations contained herein were preliminary drafts submitted for discussion purposes only and do not constitute final determinations. They have been subject to modification, substitution, or rejection and may not reflect the adopted positions of IFATCA. For the … Continued
Deactivation of Safety Nets

Deactivation of Safety Nets

DISCLAIMER The draft recommendations contained herein were preliminary drafts submitted for discussion purposes only and do not constitute final determinations. They have been subject to modification, substitution, or rejection and may not reflect the adopted positions of IFATCA. For the … Continued
High Reliability Organisation 

High Reliability Organisation 

  DISCLAIMER The draft recommendations contained herein were preliminary drafts submitted for discussion purposes only and do not constitute final determinations. They have been subject to modification, substitution, or rejection and may not reflect the adopted positions of IFATCA. For … Continued
WC 10.1.2 ORGANISATIONS

WC 10.1.2 ORGANISATIONS

  IFATCA Policy is: Controllers should have the right to establish and join organisations including unions of their own choosing and for those organisations to affiliate with international organisations. Those organisations should be free from interference from employers or governments. … Continued
WC 10.2.7 WORKING WITH UNSERVICEABLE OR INADEQUATE EQUIPMENT

WC 10.2.7 WORKING WITH UNSERVICEABLE OR INADEQUATE EQUIPMENT

  IFATCA Policy is: ATC equipment provided should include back-up secondary equipment on hot standby for use if the primary equipment becomes degraded. Controllers should be given initial and recurrent training in the degraded mode operations of their equipment. ATS … Continued
WC 10.7.2 NORMAL OPERATIONS SAFETY SURVEY

WC 10.7.2 NORMAL OPERATIONS SAFETY SURVEY

  IFATCA Policy is: Monitoring Safety in Normal Operations shall be seen as an integral element of a Safety Management System. A safety tool such as NOSS, shall meet the following conditions: Joint management/controller sponsorship; Voluntary participation; Trained observers; Set … Continued
LM 7.1.4 ROLES AND RESPONSIBILITIES OF THE CONTROLLER-IN-CHARGE (CIC) IN REGARD TO LIABILITY AND OPERATIONAL RESPONSIBILITY

LM 7.1.4 ROLES AND RESPONSIBILITIES OF THE CONTROLLER-IN-CHARGE (CIC) IN REGARD TO LIABILITY AND OPERATIONAL RESPONSIBILITY

The position of Controller-In-Charge (CIC) exists in many units in many different countries around the world. There are differences between the supervisor’s roles and those of the Controller-In-Charge, and questions exist regarding responsibilities and legality of this position. It is … Continued
TRNG 9.2.9 E-LEARNING

TRNG 9.2.9 E-LEARNING

  IFATCA Policy is: E-learning should be supported as a learning tool provided that: The quality and scope of the training shall not be diminished by introducing E- learning; E-learning serves the interest and the need of the ATCO or … Continued
Report Writing and ANSP Procedures for Serious Incidents or Accidents

Report Writing and ANSP Procedures for Serious Incidents or Accidents

DISCLAIMER The draft recommendations contained herein were preliminary drafts submitted for discussion purposes only and do not constitute final determinations. They have been subject to modification, substitution, or rejection and may not reflect the adopted positions of IFATCA. For the … Continued