Licensing & Training |

WC 10.2.7 WORKING WITH UNSERVICEABLE OR INADEQUATE EQUIPMENT

IFATCA Policy is: ATC equipment provided should include back-up secondary equipment on hot standby for use if the primary equipment becomes degraded. Controllers should be given initial and recurrent training in the degraded mode operations of their equipment. ATS … Continued

TRNG 9.4.1 A SYSTEM COMBINING ASSESSMENTS WITH EXAMINATIONS

IFATCA Policy is: During training at an Approved Training Organisation (ATO), assessments on all theoretical subjects should be carried out. Results should be analysed and discussed with the trainees. Multiple assessments and debriefings should take place consistently throughout the … Continued

Consolidation After Validation

17TH ANNUAL CONFERENCE, Copenhagen, Denmark, 24-28 April 1978 WP No. 45 Consolidation After Validation Introduction Frequently it has been observed that a student having just completed a check-out at one control position is almost immediately commencing training on another position … Continued

Forcing Controllers to Work at a Specific Foreign Location

45TH ANNUAL CONFERENCE, Kaohsiung, Taiwan, 27-31 March 2006 WP No. 166 Forcing Controllers to Work at a Specific Foreign Location Presented by PLC Introduction 1.1 During discussions based on the industrial dispute in Guatemala the topic was brought up at … Continued

Use of Unqualified Personnel

34TH ANNUAL CONFERENCE, Jerusalem, Israel, 27-31 March 1995 WP No. 126 Use of Unqualified Personnel Introduction At the ’93 Christchurch IFATCA Conference SC4 was required to review the need to develop policy on the use of unqualified personnel to provide … Continued

Review Policy on Use of Unqualified Personnel

45TH ANNUAL CONFERENCE, Kaohsiung, Taiwan, 27-31 March 2006 WP No. 163 Review Policy on Use of Unqualified Personnel Presented by PLC Introduction 1.1 At the 44th Annual IFATCA conference in Melbourne, the item of “Review Policy on Use of Unqualified … Continued

Review of Part IV – Professional Policy of the TPM

59TH ANNUAL CONFERENCE, Singapore, 30 March – 3 April 2020 WP No. 161 Review of Part IV – Professional Policy of the TPM Presented by PLC IMPORTANT NOTE: The IFATCA Annual Conference 2020 in Singapore was cancelled. The present … Continued

WC 10.3.4 RECENCY AND COMPETENCY

Controllers involved in other important tasks such as training (classroom and/or on-the-job), supervising, management and developing new systems need a minimum amount of working hours in the ops room to keep them current. IFATCA Policy is: Each Member Association should … Continued

TRNG 9.4.2 USE OF UNQUALIFIED PERSONNEL

IFATCA Policy is: To guarantee safety, controllers shall not be replaced by personnel who do not hold ATC licences in accordance with ICAO Annex 1, with the ratings, recency and competency appropriate to the duties that they are expected … Continued

Examination and Validation Procedures

18TH ANNUAL CONFERENCE, Brussels, Belgium, 23-27 April 1979 WP No. 22 Examination and Validation Procedures Introduction SC5 distributed a questionnaire to MAs to determine if current examination and validation procedures were satisfactory and if necessary to propose any changes. Only … Continued