ADME |

ADME 2.1 CONVERGING RUNWAY OPERATIONS (CROPS)

There are various types of simultaneous operations on converging/intersection runways in operation at airports all over the world. All are related to achieving maximum use of runways. It is expected that, as pressure on airport capacity grows, more and more … Continued

ADME 2.2 LAND AND HOLD SHORT OPERATIONS (LAHSO)

IFATCA Policy is: IFATCA opposes LAHSO unless the following concerns have been satisfactorily addressed: The lack of exact requirements for what are acceptable airport and runway configurations; The “hold short point” is not always easily identifiable to the pilots. … Continued

ADME 2.3 VISUAL OBSERVATION & NEW AERODROME CONTROL TOWER CONCEPTS

IFATCA Policy is: Visual observation in ATM is defined as: Observation through direct eyesight of objects situated within the line of sight of the observer possibly enhanced by binoculars. An Aerodrome Control Tower is a unit established to provide … Continued

ADME 2.4 SURFACE MOVEMENT GUIDANCE & CONTROL SYSTEMS

At their simplest these may consist of ground markings and stop & go lights. More sophisticated systems will incorporate taxiway centre line lighting and stopbars which can delineate the cleared route of aircraft. Where a need exists, surface movement radar … Continued

ADME 2.5 PROVISION OF ATS AT AERODROMES

IFATCA Policy is: Air Traffic Control service shall be provided at aerodromes that: have published IFR approach, departure or holding procedures, and where control is required for the safety of air traffic. for VFR operations, where required to ensure … Continued

ADME 2.6 RESPONSIBILITY AND FUNCTIONS OF AERODROME CONTROLLERS WITH REGARD TO SURFACE MOVEMENT

The task of apron control is not solely the responsibility of ATC; therefore, all staff involved in the provision of this service should be trained to the appropriate standard. It is important that the siting of control towers, the markings … Continued